Prerequisites
-
One of the following drivers is installed properly:
SCSIport Miniport driver for Windows Server
2003 Storport Miniport driver for Windows Server
2003 FC Port driver for Windows Server 2003 Emulex driver for Linux
HBAnyware has been installed properly. The EFIBoot files have been downloaded from the
Emulex Web site to the Emulex Repository folder (RMRepository). This folder
is in the Program Files folder. The EFIBoot file has been extracted into the Emulex
Repository folder.
| Caution |
If you are downloading EFIBoot on an
HBA attached to the remote system disk, the EFI Utility is recommended
to perform the download. |
Loading Procedure
Start HBAnyware. In the discovery tree (left pane), click the adapter
to which you want to load the firmware. -
In the property tabs (right pane), select the Firmware tab.
On the Firmware tab, click the Browse button.
The Select Firmware File browse window is displayed. Browse to the Emulex Repository. Select the EFIBoot
file to download and click OK. A status bar displays the progress of the
download. During this time the host bus adapter (or adapters) in the discovery
tree is displayed in red text, indicating that it is offline. It is displayed
in black text when the update is complete. Reboot the system.
If you are updating EFIBoot on a dual-channel HBA, repeat steps 2 through
5 to update the EFIBoot on the second port.
| Note |
If the state of the boot code message
on the board has changed, this change will be reflected immediately on
the Details tab. |
|
